F3278 Belt Tension Gauge

Product Introduction

Overview
Dimensions

Feature:

1. Used to measure the belt tension for adjusting operation.

2. Light-designed tool allows you to read and set the accurate belt tension more easily after replacing and adjusting the belt or wheel.

3. Suitable to secondary drive belts with a 10 pounds specification.

Instructions:

1. Position the small o-ring (b) over the 10 pounds mark.

2. Position the U-shaped belt cradle (e) against the bottom of the belt at a 90-degree angle and locate the large o-ring (d) to a reference point, then record the reading 1.

3. Push upward on the rubber bumper (a) until the small o-ring (b) touches the bottom of the golden tool body (c). Re-align the large O-ring (d) to the reference point and record the reading 2; The difference of the reading 1 and reading 2 is the belt deflection, then adjust the belt tension according to the service manual. Repeatedly measure and adjust until it is in line with the original setting.

Package	1 set
N.W.	0.064 (KG)
G.W.	0.074 (KG)
SET SIZE	187.31.3 (CM)
Carton SIZE	187.31.3 (CM)
CUFT	4.2'

F3278 Belt Tension Gauge

Product Introduction

Recommended other related products